Chapter 4 The HiveAP 340 Platform
60 Aerohive
MOUNTING THE HIVEAP 340
Using the mounting plate and track clips, you can mount the HiveAP 340 to the tracks of a dropped ceiling grid.
Using just the mounting plate, you can mount the HiveAP to any surface that can support its weight (3.3 lb., 1.5 kg).
his document covers the following methods for mounting the Aerohive
®
HiveAP
®
340:
• "Ceiling Mount" on page 61 - Using the mounting plate and track clips, you can mount the HiveAP 340 to the
tracks of a dropped ceiling grid so that it is suspended upside down against the ceiling.
• "Plenum Mount" on page 63 - Using the mounting plate, hanger clip, and hanger frame, you can mount it in the
plenum above a dropped ceiling.
• "Suspended Mount" on page 66 - Using the mounting plate, cable, quad-toggle, and locking device, you can
suspend the device from a beam, bracket, or any object that can support its weight (3.3 lb., 1.5 kg)
• "Surface Mount" on page 68 - Using just the mounting plate and some screws or nails, you can mount the HiveAP
directly to any surface that can support its weight.
Note: In addition to these methods, you can also mount the HiveAP 340 on a table using the set of four
rubber feet that ship with the product. Simply peel the rubber feet off the adhesive sheet and press
them against the underside of the HiveAP in its four corners.
To Next Page
Loading...
