AGCO EDT User Manual

2X4 CAN USB V
FIG.18
The
on a singl
The CAN USB protocol adapter provides the communication link between the ECUs on the vehicle and the EDT
software application.
The cables plug into the vehicle side of the 2x4 CAN USB and can be used either i
FIG.19
Connect the 90 degree USB (1) to the 2x4 CAN USB (2).
IMPORTANT:
FIG.20
Connect the vehicle side cables to th
manual for connection inform
2X4 CAN USB V
FIG.18
The
CAN USB protocol adapter for EDT is a 2x4 channel adapter capable of reading four CAN BUS network channels
on a singl
e vehicle (two channels at once).
The CAN USB protocol adapter provides the communication link between the ECUs on the vehicle and the EDT
software application.
The cables plug into the vehicle side of the 2x4 CAN USB and can be used either i
FIG.19
Connect the 90 degree USB (1) to the 2x4 CAN USB (2).
IMPORTANT:
FIG.20
Connect the vehicle side cables to th
manual for connection inform
2X4 CAN USB V
EHICLE COMMUNICATION
CAN USB protocol adapter for EDT is a 2x4 channel adapter capable of reading four CAN BUS network channels
e vehicle (two channels at once).
The CAN USB protocol adapter provides the communication link between the ECUs on the vehicle and the EDT
software application.
The cables plug into the vehicle side of the 2x4 CAN USB and can be used either i
Connect the 90 degree USB (1) to the 2x4 CAN USB (2).
IMPORTANT:
It is highly recommended the 90 degree USB cable be used for all USB connections to the terminal.
Connect the vehicle side cables to th
manual for connection inform
1
2
EHICLE COMMUNICATION
CAN USB protocol adapter for EDT is a 2x4 channel adapter capable of reading four CAN BUS network channels
e vehicle (two channels at once).
The CAN USB protocol adapter provides the communication link between the ECUs on the vehicle and the EDT
The cables plug into the vehicle side of the 2x4 CAN USB and can be used either i
Connect the 90 degree USB (1) to the 2x4 CAN USB (2).
It is highly recommended the 90 degree USB cable be used for all USB connections to the terminal.
Connect the vehicle side cables to th
e 2x4 CAN USB protocol adapter.
manual for connection inform
ation to the electrical system for the machine.
EHICLE COMMUNICATION
CAN USB protocol adapter for EDT is a 2x4 channel adapter capable of reading four CAN BUS network channels
e vehicle (two channels at once).
The CAN USB protocol adapter provides the communication link between the ECUs on the vehicle and the EDT
The cables plug into the vehicle side of the 2x4 CAN USB and can be used either i
Connect the 90 degree USB (1) to the 2x4 CAN USB (2).
It is highly recommended the 90 degree USB cable be used for all USB connections to the terminal.
e 2x4 CAN USB protocol adapter.
ation to the electrical system for the machine.
EHICLE COMMUNICATION
INTERFACE
CAN USB protocol adapter for EDT is a 2x4 channel adapter capable of reading four CAN BUS network channels
The CAN USB protocol adapter provides the communication link between the ECUs on the vehicle and the EDT
The cables plug into the vehicle side of the 2x4 CAN USB and can be used either i
Connect the 90 degree USB (1) to the 2x4 CAN USB (2).
It is highly recommended the 90 degree USB cable be used for all USB connections to the terminal.
e 2x4 CAN USB protocol adapter.
ation to the electrical system for the machine.
INTERFACE
CAN USB protocol adapter for EDT is a 2x4 channel adapter capable of reading four CAN BUS network channels
The CAN USB protocol adapter provides the communication link between the ECUs on the vehicle and the EDT
The cables plug into the vehicle side of the 2x4 CAN USB and can be used either i
It is highly recommended the 90 degree USB cable be used for all USB connections to the terminal.
e 2x4 CAN USB protocol adapter.
Follow the instructions in the machine’s service
ation to the electrical system for the machine.
CAN USB protocol adapter for EDT is a 2x4 channel adapter capable of reading four CAN BUS network channels
The CAN USB protocol adapter provides the communication link between the ECUs on the vehicle and the EDT
The cables plug into the vehicle side of the 2x4 CAN USB and can be used either i
ndependently o
It is highly recommended the 90 degree USB cable be used for all USB connections to the terminal.
Follow the instructions in the machine’s service
CAN USB protocol adapter for EDT is a 2x4 channel adapter capable of reading four CAN BUS network channels
The CAN USB protocol adapter provides the communication link between the ECUs on the vehicle and the EDT
ndependently o
r in combination.
It is highly recommended the 90 degree USB cable be used for all USB connections to the terminal.
Follow the instructions in the machine’s service
13
CAN USB protocol adapter for EDT is a 2x4 channel adapter capable of reading four CAN BUS network channels
The CAN USB protocol adapter provides the communication link between the ECUs on the vehicle and the EDT
r in combination.
It is highly recommended the 90 degree USB cable be used for all USB connections to the terminal.
Follow the instructions in the machine’s service
13
CAN USB protocol adapter for EDT is a 2x4 channel adapter capable of reading four CAN BUS network channels
The CAN USB protocol adapter provides the communication link between the ECUs on the vehicle and the EDT
Follow the instructions in the machine’s service

AGCO EDT Specifications

General

Brand	AGCO
Model	EDT
Category	Diagnostic Equipment
Language	English