Need help?Do you have a question about the AGCO EDT and is the answer not in the manual?
General| Brand | AGCO |
|---|---|
| Model | EDT |
| Category | Diagnostic Equipment |
| Language | English |
Explains the purpose and use of the EDT diagnostic tool.
Details the benefits and conditions of the software subscription.
Identifies and labels the physical parts of the diagnostic terminal.
Explains how to use the touch screen and its limitations.
Describes the protective bump case and its installation.
Details how to mount and use the suction cup work platform.
Lists and describes items included in the convenience kit.
Explains the use of the cigarette lighter adapter for charging.
Describes the docking station's functionality and connection procedure.
Details the CAN USB protocol adapter and its connection.
Explains the system for adding task-purposed functionality via modules.
Describes how to connect the terminal to networks.
Guides users through connecting the terminal to Wi-Fi networks.
Explains how to connect the terminal via a wired LAN connection.
Describes the function and use of USB 2.0 ports.
Discusses the terminal's ruggedness and environmental limitations.
Provides instructions for cleaning the diagnostic terminal screen.
Details the process for replacing the screen protector.
Explains how to view release notes after a software update.
Lists the hardware and software requirements for installing EDT on a laptop.
Details the step-by-step process for installing EDT software on a laptop.
Provides initial steps and an overview of the EDT interface.
Describes the initial screen displayed after starting the EDT application.
Explains how to switch between different unit systems (Metric, Imperial, USA).
Guides users on how to access and navigate the EDT User Guide.
Explains how to switch between different languages for the EDT.
Indicates the status of the CAN-USB connection.
Lists and describes various utility functions available within the EDT.
Explains how to capture and save screenshots of the EDT interface.
Guides users on sending system information for troubleshooting.
Guides users on submitting feedback to the EDT support group.
Describes how to view the history of uploaded files.
Allows setting or changing the operating region of the EDT.
Explains how to minimize the EDT application to the taskbar.
Guides users on configuring and testing network connections for the EDT.
Explains how to reinstall hardware drivers for the EDT.
Provides instructions for closing the EDT application and shutting down the PC.
Displays a summary of scanned control units and their software/hardware versions.
Shows graphical data on CAN bus load, voltage, and error rates.
Displays graphical representations of desired functions for diagnosis.
Shows signal descriptions, values, and ECU names in a grid view.
Allows selection and plotting of signals as waveforms against time.
Displays currently active fault codes and their descriptions.
Lists previously recorded fault codes and their details.
Provides an index to navigate diagnostic fault trees for troubleshooting.
Explains how to create custom EDT Lite installers.
Guides users through the installation process of EDT Lite.
Describes how to start and use the installed EDT Lite application.
To Next Page