AGCO EDT User Manual

16
Connecting to a LAN Network
The diagnostic terminal is designed to connect to the inter
via a wired LAN environment, typically an Ethernet port must be
If the ability to connect to the internet and view web sites in a web browser is available to the dealership, then
connecting the terminal for registration and software updates is possible.
Your ED
found
service before calling EDT
FIG.
It is possible also determine the internet settings
USB Port
FIG.
The USB 2.0 ports (
recommended that for larger peripheral devices, use of AC powered USB devices over USB powered devices be used
for best results. Low power devices (USB memory devices, SD Card readers) can be us
consideration
16
Connecting to a LAN Network
The diagnostic terminal is designed to connect to the inter
via a wired LAN environment, typically an Ethernet port must be
If the ability to connect to the internet and view web sites in a web browser is available to the dealership, then
connecting the terminal for registration and software updates is possible.
Your ED
T tablet computer should detect the local internet connection automatically.
found
from Tablet Kiosk Users Guide.
service before calling EDT
FIG.
26
It is possible also determine the internet settings
USB Port
FIG.
27
The USB 2.0 ports (
recommended that for larger peripheral devices, use of AC powered USB devices over USB powered devices be used
for best results. Low power devices (USB memory devices, SD Card readers) can be us
consideration
Connecting to a LAN Network
The diagnostic terminal is designed to connect to the inter
via a wired LAN environment, typically an Ethernet port must be
If the ability to connect to the internet and view web sites in a web browser is available to the dealership, then
connecting the terminal for registration and software updates is possible.
T tablet computer should detect the local internet connection automatically.
from Tablet Kiosk Users Guide.
service before calling EDT
It is possible also determine the internet settings
The USB 2.0 ports (
4
) can be used to connect any number of Windows
recommended that for larger peripheral devices, use of AC powered USB devices over USB powered devices be used
for best results. Low power devices (USB memory devices, SD Card readers) can be us
consideration
s.
Connecting to a LAN Network
The diagnostic terminal is designed to connect to the inter
via a wired LAN environment, typically an Ethernet port must be
If the ability to connect to the internet and view web sites in a web browser is available to the dealership, then
connecting the terminal for registration and software updates is possible.
T tablet computer should detect the local internet connection automatically.
from Tablet Kiosk Users Guide.
If there are issues connecting to the web, contact your LAN administrator to verify
service before calling EDT
technical support.
It is possible also determine the internet settings
) can be used to connect any number of Windows
recommended that for larger peripheral devices, use of AC powered USB devices over USB powered devices be used
for best results. Low power devices (USB memory devices, SD Card readers) can be us
Connecting to a LAN Network
The diagnostic terminal is designed to connect to the inter
via a wired LAN environment, typically an Ethernet port must be
If the ability to connect to the internet and view web sites in a web browser is available to the dealership, then
connecting the terminal for registration and software updates is possible.
T tablet computer should detect the local internet connection automatically.
If there are issues connecting to the web, contact your LAN administrator to verify
technical support.
It is possible also determine the internet settings
manually via Network and Sharing Center under Control Panel.
) can be used to connect any number of Windows
recommended that for larger peripheral devices, use of AC powered USB devices over USB powered devices be used
for best results. Low power devices (USB memory devices, SD Card readers) can be us
The diagnostic terminal is designed to connect to the inter
ne
t over standard internet port (3
via a wired LAN environment, typically an Ethernet port must be
within the reach of the networking cable you are using.
If the ability to connect to the internet and view web sites in a web browser is available to the dealership, then
connecting the terminal for registration and software updates is possible.
T tablet computer should detect the local internet connection automatically.
If there are issues connecting to the web, contact your LAN administrator to verify
manually via Network and Sharing Center under Control Panel.
) can be used to connect any number of Windows
recommended that for larger peripheral devices, use of AC powered USB devices over USB powered devices be used
for best results. Low power devices (USB memory devices, SD Card readers) can be us
t over standard internet port (3
within the reach of the networking cable you are using.
If the ability to connect to the internet and view web sites in a web browser is available to the dealership, then
connecting the terminal for registration and software updates is possible.
T tablet computer should detect the local internet connection automatically.
If there are issues connecting to the web, contact your LAN administrator to verify
manually via Network and Sharing Center under Control Panel.
) can be used to connect any number of Windows
recommended that for larger peripheral devices, use of AC powered USB devices over USB powered devices be used
for best results. Low power devices (USB memory devices, SD Card readers) can be us
t over standard internet port (3
within the reach of the networking cable you are using.
If the ability to connect to the internet and view web sites in a web browser is available to the dealership, then
T tablet computer should detect the local internet connection automatically.
T
he proper instructions
If there are issues connecting to the web, contact your LAN administrator to verify
manually via Network and Sharing Center under Control Panel.
) can be used to connect any number of Windows
®
app
roved peripheral devices. It is
recommended that for larger peripheral devices, use of AC powered USB devices over USB powered devices be used
for best results. Low power devices (USB memory devices, SD Card readers) can be us
t over standard internet port (3
).
To connect to the Internet
within the reach of the networking cable you are using.
If the ability to connect to the internet and view web sites in a web browser is available to the dealership, then
he proper instructions
If there are issues connecting to the web, contact your LAN administrator to verify
manually via Network and Sharing Center under Control Panel.
roved peripheral devices. It is
recommended that for larger peripheral devices, use of AC powered USB devices over USB powered devices be used
for best results. Low power devices (USB memory devices, SD Card readers) can be us
ed without power
To connect to the Internet
within the reach of the networking cable you are using.
If the ability to connect to the internet and view web sites in a web browser is available to the dealership, then
he proper instructions
can be
If there are issues connecting to the web, contact your LAN administrator to verify
manually via Network and Sharing Center under Control Panel.
roved peripheral devices. It is
recommended that for larger peripheral devices, use of AC powered USB devices over USB powered devices be used
ed without power
To connect to the Internet
within the reach of the networking cable you are using.
If the ability to connect to the internet and view web sites in a web browser is available to the dealership, then
can be
If there are issues connecting to the web, contact your LAN administrator to verify
roved peripheral devices. It is
recommended that for larger peripheral devices, use of AC powered USB devices over USB powered devices be used
ed without power

AGCO EDT Specifications

General

Brand	AGCO
Model	EDT
Category	Diagnostic Equipment
Language	English