AGCO EDT - Touch Screen Sensitivity; Protective Bump Case

Touch Screen Sensitivity
The touch screen is resistive touch and requires some pressure to register a result. Do not use excessive force when
usi
IMPORTANT:
Protective B
FIG.8
The protective b
as well as impact.
FIG.9
To use the bump case, slide the d
FIG.10
Connect the
cable provides a convenient point for the
te
Touch Screen Sensitivity
The touch screen is resistive touch and requires some pressure to register a result. Do not use excessive force when
usi
ng the touch screen. Smooth even pressure on the screen will result in prolonged screen life.
IMPORTANT:
pencils, pens, screwdrivers or any other objects to touch
Protective B
FIG.8
The protective b
as well as impact.
FIG.9
To use the bump case, slide the d
FIG.10
Connect the
90 degree USB cable to the diagnostic terminal. Att
cable provides a convenient point for the
te
rminal USB port is not damaged.
Touch Screen Sensitivity
The touch screen is resistive touch and requires some pressure to register a result. Do not use excessive force when
ng the touch screen. Smooth even pressure on the screen will result in prolonged screen life.
IMPORTANT:
Do NOT use any objects other than the stylus that comes with the terminal or a finger tip. Do not use
pencils, pens, screwdrivers or any other objects to touch
Protective B
ump Case
The protective b
ump case for the diagnostic terminal will provide reasonable protection against dust, dirt a
as well as impact.
It is recommended the bump case be installed on the termin
To use the bump case, slide the d
90 degree USB cable to the diagnostic terminal. Att
cable provides a convenient point for the
rminal USB port is not damaged.
Touch Screen Sensitivity
The touch screen is resistive touch and requires some pressure to register a result. Do not use excessive force when
ng the touch screen. Smooth even pressure on the screen will result in prolonged screen life.
Do NOT use any objects other than the stylus that comes with the terminal or a finger tip. Do not use
pencils, pens, screwdrivers or any other objects to touch
ump Case
ump case for the diagnostic terminal will provide reasonable protection against dust, dirt a
It is recommended the bump case be installed on the termin
To use the bump case, slide the d
iagnostic terminal into the bump case and close the access cover.
90 degree USB cable to the diagnostic terminal. Att
cable provides a convenient point for the
rminal USB port is not damaged.
The touch screen is resistive touch and requires some pressure to register a result. Do not use excessive force when
ng the touch screen. Smooth even pressure on the screen will result in prolonged screen life.
Do NOT use any objects other than the stylus that comes with the terminal or a finger tip. Do not use
pencils, pens, screwdrivers or any other objects to touch
ump case for the diagnostic terminal will provide reasonable protection against dust, dirt a
It is recommended the bump case be installed on the termin
iagnostic terminal into the bump case and close the access cover.
90 degree USB cable to the diagnostic terminal. Att
cable provides a convenient point for the
2x4 CAN USB protocol adapter, and provides a “break away” protection so the
The touch screen is resistive touch and requires some pressure to register a result. Do not use excessive force when
ng the touch screen. Smooth even pressure on the screen will result in prolonged screen life.
Do NOT use any objects other than the stylus that comes with the terminal or a finger tip. Do not use
pencils, pens, screwdrivers or any other objects to touch
ump case for the diagnostic terminal will provide reasonable protection against dust, dirt a
It is recommended the bump case be installed on the termin
iagnostic terminal into the bump case and close the access cover.
90 degree USB cable to the diagnostic terminal. Att
2x4 CAN USB protocol adapter, and provides a “break away” protection so the
The touch screen is resistive touch and requires some pressure to register a result. Do not use excessive force when
ng the touch screen. Smooth even pressure on the screen will result in prolonged screen life.
Do NOT use any objects other than the stylus that comes with the terminal or a finger tip. Do not use
pencils, pens, screwdrivers or any other objects to touch
the screen or damage can occur.
ump case for the diagnostic terminal will provide reasonable protection against dust, dirt a
It is recommended the bump case be installed on the termin
iagnostic terminal into the bump case and close the access cover.
90 degree USB cable to the diagnostic terminal. Att
ach the cable to the bump case.
2x4 CAN USB protocol adapter, and provides a “break away” protection so the
The touch screen is resistive touch and requires some pressure to register a result. Do not use excessive force when
ng the touch screen. Smooth even pressure on the screen will result in prolonged screen life.
Do NOT use any objects other than the stylus that comes with the terminal or a finger tip. Do not use
the screen or damage can occur.
ump case for the diagnostic terminal will provide reasonable protection against dust, dirt a
It is recommended the bump case be installed on the termin
al during operation of the EDT.
iagnostic terminal into the bump case and close the access cover.
ach the cable to the bump case.
2x4 CAN USB protocol adapter, and provides a “break away” protection so the
The touch screen is resistive touch and requires some pressure to register a result. Do not use excessive force when
ng the touch screen. Smooth even pressure on the screen will result in prolonged screen life.
Do NOT use any objects other than the stylus that comes with the terminal or a finger tip. Do not use
the screen or damage can occur.
ump case for the diagnostic terminal will provide reasonable protection against dust, dirt a
al during operation of the EDT.
iagnostic terminal into the bump case and close the access cover.
ach the cable to the bump case.
The 90 degree USB
2x4 CAN USB protocol adapter, and provides a “break away” protection so the
The touch screen is resistive touch and requires some pressure to register a result. Do not use excessive force when
Do NOT use any objects other than the stylus that comes with the terminal or a finger tip. Do not use
ump case for the diagnostic terminal will provide reasonable protection against dust, dirt a
nd moisture,
al during operation of the EDT.
The 90 degree USB
2x4 CAN USB protocol adapter, and provides a “break away” protection so the
9
The touch screen is resistive touch and requires some pressure to register a result. Do not use excessive force when
Do NOT use any objects other than the stylus that comes with the terminal or a finger tip. Do not use
nd moisture,
The 90 degree USB
2x4 CAN USB protocol adapter, and provides a “break away” protection so the