AGCO EDT - CALIBRATION

59
CALIBRATION
FIG.110 Go to the Calibration tab and select an item from the list. Press the Start icon (1) to run the Calibration script of
the selected item through a sequence of steps. Follow the instructions given by EDT.
Available calibrations for Valtra Suolahti vehicles vary depending of the tractor model:
- Main Gear Calibration (Versu / Direct / Hitech 5PS)
- Range Gear Calibration (Versu / Direct / Hitech 5PS)
- Hydrostatic Unit (Direct only)
- Speed Sensor Calibration
- F- clutch Calibration
- R-clutch Calibration
- C1-clutch Calibration (Versu / Hitech)
- C2-clutch Calibration (Versu / Hitech)
- C3-clutch Calibration (Versu / Hitech)
- C4-clutch Calibration (Versu / Hitech 5PS)
- Clutch Pedal Calibration
- Powershuttle Adjustments
- Powershift Adjustments (Versu / Hitech)
- Injector Calibration
NOTE: See the machine special instructions for the information on how to use the calibrations from Valtra Info.