34
USING A PRINTER
The EDT runs on a standard Windows
®
7 operating system and can be used for printing.
Printers (and faxing) can be set up by selecting Start then Devices and Printers. Refer to the printer user's manual for
configuration steps.
NON-AGCO APPROVED SOFTWARE
Non-AGCO approved software can be loaded on the diagnostic terminal. The system is not a locked unit. It is
STRONGLY RECOMMENDED that the dealer NOT install any unauthorized software to the terminal as many software
packages can introduce viruses, or errors in the tool operation which can lead to unnecessary tool downtime.
To Next Page
Loading...