AGCO EDT - Page 22

22
FIG.36
Select the region that represents the country where the EDT is currently be
FIG.37
The region will be displayed at the bottom of the EDT main screen
setup, select the Utilities
Select the Set Region icon
be shown at the bottom of the EDT main screen.
22
FIG.36
Select the region that represents the country where the EDT is currently be
FIG.37
The region will be displayed at the bottom of the EDT main screen
setup, select the Utilities
Select the Set Region icon
be shown at the bottom of the EDT main screen.
Select the region that represents the country where the EDT is currently be
The region will be displayed at the bottom of the EDT main screen
setup, select the Utilities
icon
Select the Set Region icon
be shown at the bottom of the EDT main screen.
Select the region that represents the country where the EDT is currently be
The region will be displayed at the bottom of the EDT main screen
icon
(2
) on the bottom right
Select the Set Region icon
(3).
The Region menu will appear. Select the region. Select SAVE.
be shown at the bottom of the EDT main screen.
Select the region that represents the country where the EDT is currently be
The region will be displayed at the bottom of the EDT main screen
) on the bottom right
The Region menu will appear. Select the region. Select SAVE.
be shown at the bottom of the EDT main screen.
Select the region that represents the country where the EDT is currently be
The region will be displayed at the bottom of the EDT main screen
) on the bottom right
-
hand corner of the EDT screen.
The Region menu will appear. Select the region. Select SAVE.
Select the region that represents the country where the EDT is currently be
ing operated from. Select SAVE.
The region will be displayed at the bottom of the EDT main screen
(1).
To change the region a
hand corner of the EDT screen.
The Region menu will appear. Select the region. Select SAVE.
ing operated from. Select SAVE.
To change the region a
hand corner of the EDT screen.
The Utility Menu will appear.
The Region menu will appear. Select the region. Select SAVE.
ing operated from. Select SAVE.
To change the region a
t any time after the i
The Utility Menu will appear.
The Region menu will appear. Select the region. Select SAVE.
The new regi
ing operated from. Select SAVE.
t any time after the i
nitial
The Utility Menu will appear.
The new regi
on will
nitial
The Utility Menu will appear.
on will