AGFA Drystar 5503 - Remove the Packing Materials

Remove the packing materials
1. Loosen 3 plastic screws.
5/20
2903S EN 201212072903S EN 20121207
2 Remove the packing materials
1 Loosen 3 plastic screws.
3 Remove the foam blocks.
5 Create a descending slope.
2 Remove the cardboard box.
4 Remove the plastic bag.
FRO NT SIDE
A
Unpacking
2. Remove the cardboard box.
5/20
2903S EN 201212072903S EN 20121207
2 Remove the packing materials
1 Loosen 3 plastic screws.
3 Remove the foam blocks.
5 Create a descending slope.
2 Remove the cardboard box.
4 Remove the plastic bag.
FRO NT SIDE
A
Unpacking
3. Remove the foam blocks.
5/20
2903S EN 201212072903S EN 20121207
2 Remove the packing materials
1 Loosen 3 plastic screws.
3 Remove the foam blocks.
5 Create a descending slope.
2 Remove the cardboard box.
4 Remove the plastic bag.
FRO NT SIDE
A
Unpacking
4. Remove the plastic bag.
5/20
2903S EN 201212072903S EN 20121207
2 Remove the packing materials
1 Loosen 3 plastic screws.
3 Remove the foam blocks.
5 Create a descending slope.
2 Remove the cardboard box.
4 Remove the plastic bag.
FRO NT SIDE
A
Unpacking
5. Create a descending slope.
Drystar 5500, Drystar 5503 | Plug & Play Installation Manual |
143
2901J EN 20191018 0826