Basic Operation (operator mode)
This section focuses on the basic operating principles of the printer. After
reading this chapter, the operator should be able to produce diagnostic usable
hardcopies. No special technical skills are required.
All basic operator functions can be activated directly by pressing a single key
on the keypad.
Function / Task
Description
‘Managing the print
queue’
Jobs that have been received are put in a print queue,
waiting to be printed.
‘Assigning emergency
priority’
To rearrange the order in which jobs are waiting to be
printed. Jobs that have emergency priority are placed
on top of the print queue.
‘Deleting print jobs’ To remove print jobs from the print queue. Print jobs
that are deleted will not be printed.
‘Loading films’ Instructions for loading new films on the printer.
Topics:
• Managing the print queue
• Assigning emergency priority
• Deleting print jobs
• Changing the film format of the trays
• Loading films
70 | Drystar 5500, Drystar 5503 | Basic Operation (operator mode)
2901J EN 20191018 0826
To Next Page
Loading...
