• The printer: (serial number, densitometer info, film counts, software
version, etc.),
• The controller (image source, date, time, etc.).
For more detailed information, refer to the Service documentation.
Mammography application (optional)
On the bottom left corner of each film, a “System info” area will be printed.
This info can only be read using a magnifying glass.
The System info area contains info about:
• The printer: (serial number, densitometer info, film counts, software
version, etc.),
• The controller (image source, date, time, etc.).
For more detailed information, refer to the Service documentation.
42 | Drystar 5500, Drystar 5503 | Introduction
2901J EN 20191018 0826
To Next Page
