AgfaPhoto Optima 8328m - Setting the Iso; Setting the Exposure; Setting the Aeb; Setting the Highlight

AgfaPhoto OPTIMA 8328m
36
Setting the ISO
With the initial settings, the ISO sensitivity is automatically set according to the
brightness of the subject.
Option Description
Auto Sets the ISO sensitivity automatically.
ISO 50 Sets the sensitivity to ISO 50 equivalent.
ISO 100 Sets the sensitivity to ISO 100 equivalent.
ISO 200 Sets the sensitivity to ISO 200 equivalent.
ISO 400 Sets the sensitivity to ISO 400 equivalent.
ISO 800 Sets the sensitivity to ISO 800 equivalent.
ISO 1600 Sets the sensitivity to ISO 1600 equivalent.
ISO 3200 Sets the sensitivity to ISO 3200 equivalent.
y Higher ISO speeds increase the image noise. To take clean images, use as low
ISO speed as possible.
Setting the Exposure
Set the exposure value manually to compensate unusual lighting conditions such as
indirect indoor lighting, dark backgrounds, and strong backlighting.
Setting the AEB
Sets the auto exposure bracketing (AEB) to shoot 3 continuous images, each with a
different exposure setting: correctly exposed, underexposed, and overexposed.
Setting the Highlight
Make the subject stand out from its surroundings. The subject will be in focus in three
different ranges: / /
y The Photo Frame and Face Tracking cannot be used while using the Highlight.
T
T
i
i
p
p
s
s
T
T
i
i
p
p
s
s