Agilent Technologies 1260 Infinity G1315C - Page 50

50 Agilent 1260 Infinity DAD and MWD User Manual
3 Installing the Module
Installing the Detector
9 Turn on power by pushing the button at the lower left hand side of the
module. The status LED should be green.
Figure 10 Front View of Detector
6WDWXVLQGLFDWRU
JUHHQ\HOORZUHG
/LQHSRZHUVZLWFK
ZLWKJUHHQOLJKW
NOTE
The module is turned on when the line power switch is pressed and the green indicator
lamp is illuminated. The module is turned off when the line power switch is protruding and
the green light is off.
NOTE
The module was shipped with default configuration settings. To change these settings see
“Configuration Switch” on page 264.