298 34980A User’s Guide
11 4-Channel Isolated D/A Converter with Waveform Memory Module
Configuring a DAC Module
Example: Querying the system for module identify (all modules) The following
command returns the identify of the module installed in slot 7.
SYSTem:CTYPe? 7
Example: Resetting the module(s) to power-on state The following command
resets a module in slot 4 to its power- on state.
SYST:CPON 4
NOTE
Using this command will erase any downloaded waveforms.
To Next Page
Loading...
