Agilent Technologies 5977C Series User Manual

5977C GC/MSD Operating Manual 9
To Open the Analyzer Chamber 149
To Remove the EI HES 151
To Connect/Disconnect Wiring to the EI HES 153
To Disassemble the EI HES 154
To Clean the EI HES 157
To Assemble the EI HES 160
To Remove the EI HES Filaments 165
To Install the EI HES Filament 167
To Install the EI HES 168
To Remove the EI XTR, SS, Inert, or Hydro
nert Source 169
To Connect/Disconnect Wiring from the EI XTR, SS, and Inert
Sources 170
To Connect/Disconnect Wiring from the EI Hydro
nert
Source 171
To Disassemble the EI SS or EI Inert Source 172
To Disassemble the EI XTR Source 175
To Disassemble the EI Hydro
nert Source 178
To Clean an EI XTR, SS, or Inert Source 181
To Clean the EI Hydro
nert Source 185
To Assemble an EI SS or Inert Source 188
To Assemble the EI XTR Source 191
To Assemble the EI Hydro
nert Source 194
To Replace a Filament in an EI XTR, SS, Inert, or Hydro
nert
Source 197
To Install the EI XTR, SS, Inert, or Hydro
nert Source 199
To Replace the Electron Multiplier Horn 200

Agilent Technologies 5977C Series Specifications

General

Brand	Agilent Technologies
Model	5977C Series
Category	Security Sensors
Language	English