Agilent Technologies 8753ET Manual Supplement

6-5
Supplement for the Programmer’s Guide (Firmware Revision 7.68)
Alphabetical Command Reference
ECALAB?
Syntax
ECALAB?;
Description
Front Panel Equivalents
GPIB only: no front panel equivalent
ECALCONT
Syntax
ECALCONT;
Description
Front Panel Equivalents
Command Description Range Query Response
ECALAB? Queries the analyzer for the currently
selected module. This query returns
the integer “1” if the “A” module is
selected or the integer “0” if the “B”
module is selected.
N/A
<0|1><
L
F
>
Command Description Range Query Response
ECALCONT Continues a paused ECal during a
manual thru operation or a dual
module operation. This command is
used with the polling command
“ECALPAUSED” on page 6-13 which
returns the integer “1” when paused
or the integer “0” when not paused.
N/A N/A
Command Hardkey Softkey
ECALCONT
Cal
CONTINUE ECal

Agilent Technologies 8753ET Specifications

General

Brand	Agilent Technologies
Model	8753ET
Category	Measuring Instruments
Language	English