2-15
Supplement for the Reference Guide (Firmware Revision 7.66)
Error Messages
Error Messages
Error Messages in Alphabetical Order
Error Messages in Numerical Order
BANDWIDTH LIMIT INVALID: MIN BW > MAX BW
Information
Message
The bandwidth test has a minimum bandwidth greater than the maximum
bandwidth. Change the minimum bandwidth to a frequency less than the
frequency of the maximum bandwidth or change the maximum bandwidth to a
frequency greater than the frequency of the minimum bandwidth.
CAUTION: FLOPPY DISK IS FULL
Error Number
218
This message is displayed if you try to save files to the floppy disk that does not
have enough memory to perform the save task. Correct by inserting anew floppy
disk in the front panel disk drive or by erasing files from the current floppy disk.
CAUTION: TOO MANY SEGMENTS OR POINTS
Information
Message
This message is displayed if you try to insert too many segments or points using
your current function.
RIPPLE LIMIT TABLE EMPTY
Information
Message
The ripple limit table does not have any frequency bands defined. Add at least
one frequency band to the ripple limit table for ripple testing.
Error
Number
Error
218 CAUTION: FLOPPY DISK IS FULL
To Next Page
Loading...
Need help?
General
