Agilent Technologies 8753ET - Modifying Calibration Kits; Saving Modified Calibration Kits to a Disk

1-37
Supplement for the User’s Guide (Firmware Version 7.66)
Modifying Calibration Kits
Modifying Calibration Kits
Saving Modified Calibration Kits to a Disk
The calibration kit, along with any calibration data and other instrument state
information, can be saved to an ISTATE file on a floppy disk. To save a modified calibration
kit with an instrument state, press:
Cal
CAL KIT
SELECT CAL KIT
USER KIT
Save/Recall
SAVE STATE