Agilent Technologies 8753ET Manual Supplement

6-6
Supplement for the Programmer’s Guide (Firmware Revision 7.68)
Alphabetical Command Reference
ECALDONE
Syntax
ECALDONE;
Description
Front Panel Equivalents
GPIB only: no front panel equivalent
ECALERC
Syntax
ECALERC;
Description
Front Panel Equivalents
Command Description Range Query Response
ECALDONE This command is designed to be used
in a polling loop to determine if the
ECal operation is finished. The
command returns information
immediately. The integer “1” is
returned if the ECal has completed
the calibration or returns the integer
“0” if the ECal is not finished.
N/A N/A
Command Description Range Query Response
ECALERC
a
a. For ES analyzers, S
11
/ S
21
enhanced response is performed. For ET analyzers,
transmission / reflection enhanced response is performed.
Performs an ECal forward enhanced
response calibration.
N/A N/A
Command Hardkey Softkey
ECALERC
ES models:
ET models:
Cal
S11/21 ENH. RESP.
TRAN/REFL ENH. RESP.

Agilent Technologies 8753ET Specifications

General

Brand	Agilent Technologies
Model	8753ET
Category	Measuring Instruments
Language	English