Agilent Technologies 8753ET Manual Supplement

6-12
Supplement for the Programmer’s Guide (Firmware Revision 7.68)
Alphabetical Command Reference
ECALNFREQS
Syntax
ECALNFREQS;
Description
Front Panel Equivalents
GPIB only: no front panel equivalent
ECALOMII
Syntax
ECALOMII<ON|OFF>; or ECALOMII?;
Description
Front Panel Equivalents
Command Description Range Response
ECALNFREQS Extracts the number of the factory
calibration frequency points that are
stored in the ECal module. Use this
command to determine the size of the
array to put the frequency values
returned from the command
“ECALFREQS” on page 6-7.
varieswith
ECal
module
<num><
L
F
>
Command Description Range Query Response
ECALOMIION Sets omit isolation to “on.” N/A
<0|1><
L
F
>
ECALOMIIOFF Sets omit isolation to “off.” N/A
<0|1><
L
F
>
Command Hardkey Softkey
ECALOMIION
ECALOMIIOFF
Cal
OMIT ISOL ON off
Cal
OMIT ISOL on OFF

Agilent Technologies 8753ET Specifications

General

Brand	Agilent Technologies
Model	8753ET
Category	Measuring Instruments
Language	English