7-2
Supplement for the Installation and Quick Start Guide (Firmware Version 7.68)
Using This Chapter
Using This Chapter
This chapter contains the supplemental information changes to the installation and quick
start guides that coincide with the release of firmware revision 7.68. These changes
pertain to the following installation and quick start guides.
• 8753ET and 8753ES Network Analyzers Installation and Quick Start Guide
(part number 08753-90471)
• 8753ES Option 011 Network Analyzer Installation and Quick Start Guide
(part number 08753-90478)
The following list describes the changes to 8753ET and 8753ES installation and quick
start guides printed prior to February 2001. Each of the changes are described in detail in
the remainder of this chapter. The page references in this list refer to page numbers in this
supplement.
• Front Matter
— Replace the warning describing the line fuse type and rating with a revised warning
in “General Safety Considerations.” See page 7-3.
• Quick Start: Learning How to Make Measurements Chapter
— Replace the paragraph describing checking and replacing the fuse with the revised
paragraph in the “Power-Up Problems” subsection of “If You Encounter a Problem.”
See page 7-4.
To Next Page
Loading...
Need help?
General
