Agilent Technologies E4440A User Manual

Chapter 2 125
Instrument Functions: A - L
File
Instrument Functions: A - L
2.6.2.3.3 Bitmap
When the file type is Screen, this key selects the bitmap Graphics Interchange Format
(GIF) file format for your saved data. For more information on file types, refer to
“File
Types” on page 114
.
Key Path:
File, Save, Format
2.6.2.3.4 Reverse Bitmap
When the file type is
Screen, this key selects the inverse bitmap file format (GIF) for your
saved data. For more information on file types, refer to
“File Types” on page 114.
Key Path:
File, Save, Format
2.6.2.4 Source
When the file type is set to
Trace, this key allows you to save trace 1, 2, 3 or All. Saving trace
All saves all traces in a single.TRC file.
When the file type is set to
Corrections, Source accesses the Antenna, Cable, Other and User
menu keys, which allow you to select the type of correction to be saved.
When the file type is set to
Limits, Source accesses the Limit 1 and Limit 2 menu keys. Limit 1
and
Limit 2 provide data sets to determine whether a trace has exceeded preset
specifications. Limit sets can hold up to 200 points and can only be saved individually.
For any other Save type,
Source is disabled (grayed out).
Key Path:
File, Save
State Saved: Source is not saved in Instrument State.
Factory Preset:
Source survives Factory Preset and *RST, but is set to All Traces at power up.
2.6.2.4.1
Trace 1
Selects trace 1 to be saved.
Key Path:
File, Save, Source

Agilent Technologies E4440A Specifications

General

Brand	Agilent Technologies
Model	E4440A
Category	Measuring Instruments
Language	English