Agilent Technologies E4440A User Manual

Chapter 6 355
Using the STATus System
Using the Status Registers
Using the STATus System
Status Byte Register
The RQS bit is read and reset by a serial poll. MSS (the same bit
position) is read, non-destructively by the *STB? command. If you serial
poll bit 6 it is read as RQS, but if you send *STB it reads bit 6 as MSS.
For more information refer to IEEE 488.2 standards, section 11.

Agilent Technologies E4440A Specifications

General

Brand	Agilent Technologies
Model	E4440A
Category	Measuring Instruments
Language	English