Agilent Technologies E4440A User Manual

370 Chapter 6
Using the STATus System
Common Using the STATus System IEEE Commands
Using the STATus System
Wait-to-Continue
*WAI
This command causes the instrument to wait until all pending
commands/processes are completed before executing any additional
commands. There is no query form for the command.
The instrument does not wait for completion of all processes. The
processes that are monitored are identified in the *OPC? command
description.
Key Type: There is no equivalent front-panel key.
Example: INIT:CONT OFF; INIT;*WAI

Agilent Technologies E4440A Specifications

General

Brand	Agilent Technologies
Model	E4440A
Category	Measuring Instruments
Language	English