Agilent Technologies E4440A User Manual

Chapter 2 129
Instrument Functions: A - L
File
Instrument Functions: A - L
Example: MMEM:LOAD:STAT 1,’C:MYSTATE.STA’ loads the state file
C:\MYSTATE.STA.
MMEM:LOAD:TRAC TRACE3,’C:MYTRACE.TRC’ loads the trace in file
C:\MYTRACE.TRC into trace 3.
2.6.3.2 Type
Enables you to select the type of file you want to load.
See “File Types” on page 114 and “Type”
on page 117
for more information.
The file types available for loading are described in the following table:
NOTE All is not a file type option in Load, you have to specify the desired file type.
Key Path:
File, Load
2.6.3.3 Sort
Allows you to view saved files according to a selected file attribute.
See “Sort” on page 118 for
more information.
Key Path:
File, Load
Type Format Destination Extension
State State STA
Trace Trace + state Trace 1, 2, 3, or all traces TRC
Comma separated trace values Trace 1, 2, 3, or all traces CSV
Limit Internal data format LIM
Corrections Internal data format ANT, CBL, OTH,
and AMP

Agilent Technologies E4440A Specifications

General

Brand	Agilent Technologies
Model	E4440A
Category	Measuring Instruments
Language	English