Agilent Technologies E4440A User Manual

246 Chapter 4
Instrument Functions: P - Z
System
Instrument Functions: P - Z
Default: Mode
Remote Command:
See “Preset Type” on page 245.
Example:
SYST:PRES[:USER]:SAVE saves the current state to be used as the preset
user state.
SYST:PRES:TYPE USER defines the type of preset as the user preset.
With user preset selected, and a user state saved, use SYST:PRES to do a
user preset.
4.9.2.2.2 Mode
Sets the preset type to “Mode.” When you do a preset, the current mode factory default
instrument state will be restored. A mode preset does not change the mode. Refer to
“Preset” on page 211 for more information.
Key Path: System, Power On/Preset, Preset Type
Readback: Mode
Annunciation/
Annotation: None
Dependencies/
Couplings: None
State Saved: Survives
Preset and power cycle, but no saved in Instrument State.
SCPI Status Bits/
OPC Dependencies: None
Factory
Default:
Mode
Remote Command:
:SYSTem:PRESet:TYPE See “Preset Type” on page 245.
Example:
SYST:PRES:TYPE MODE defines the type of preset as the mode preset.
After you have selected mode as the preset type, use SYST:PRES to do a
mode preset.

Agilent Technologies E4440A Specifications

General

Brand	Agilent Technologies
Model	E4440A
Category	Measuring Instruments
Language	English