Agilent Technologies E4440A User Manual

260 Chapter 4
Instrument Functions: P - Z
System
Instrument Functions: P - Z
Remote Command:
There is no remote command for this key.
4.9.5.7 SCPI LAN
Displays keys to enable SCPI functionality over LAN. There are a number of different
ways to send SCPI remote commands to the instrument over the LAN. It can be a problem
to have multiple users simultaneously accessing the instrument over the LAN. These keys
allow you to limit that somewhat by disabling the telnet socket and/or SICL capability.
Key Path: System, Config I/O
Remote Command:
There is no remote command for this key.
4.9.5.7.1 SCPI Telnet
Turns on/off the SCPI LAN telnet capability allowing you to limit SCPI access over LAN
via telnet.
Key Path: System, SCPI Lan
State Saved: Survives Preset and power cycle, but not saved in Instrument State.
SCPI Status Bits/
OPC Dependencies: None
Factory
Default: On (Reset by
System, Restore Sys Defaults.)
Remote Command:
:SYSTem:COMMunicate:LAN:SCPI:TELNet:ENABle OFF|ON|0|1
:SYSTem:COMMunicate:LAN:SCPI:TELNet:ENABle?
Example: SYST:COMM:LAN:SCPI:TELN:ENAB ON

Agilent Technologies E4440A Specifications

General

Brand	Agilent Technologies
Model	E4440A
Category	Measuring Instruments
Language	English