Agilent Technologies E4440A User Manual

308 Chapter 5
Programming Fundamentals
Programming Command Compatibility Across Model Numbers and Across Modes
Programming Fundamentals
TRIGger
commands
In Spectrum Analysis
mode only one value
can be set for the
trigger’s source, delay,
level, or polarity.
Basic, GSM, EDGE,
cdmaOne, cdma2000,
W-CDMA, NADC, PDC
modes function the
same as VSA
You can select a unique
trigger source for each
mode. Each trigger
source can have unique
settings for the its delay,
level, and polarity.
Same as VSA A.04.00.
You can select a unique
trigger source for each
mode. Each trigger
source can have unique
settings for the its
delay, level, and
polarity.
AUTO ON|OFF
control and
setting manual
values
We recommend that
you set a function’s
automatic state to
OFF, before you send it
your manual value.
Some functions will
turn off the automatic
mode when you send a
specific manual value,
but others will not.
This also varies with
the instrument model.
We recommend that you
set a function’s
automatic state to OFF,
before you send it your
manual value.
Some functions will turn
off the automatic mode
when you send a specific
manual value, but
others will not. This also
varies with the
instrument model.
We recommend that you
set a function’s
automatic state to OFF,
before you send it your
manual value.
Some functions will
turn off the automatic
mode when you send a
specific manual value,
but others will not. This
also varies with the
instrument model.
Command PSA Series VSA E4406A: A.04.00 VSA E4406A: A.05.00

Agilent Technologies E4440A Specifications

General

Brand	Agilent Technologies
Model	E4440A
Category	Measuring Instruments
Language	English