Agilent 1260 Infinity II Preparative Autosampler User Manual 67
Installation of the Optional Sample Cooler
4
Using the Sample Cooler in an Infinity II Sampler
Control
The Cooler section of the Control dialog box is available when you have a
cooler installed. It allows you to switch the cooler on and off manually.
Select On to switch on the cooler. Specify the required temperature in the
adjacent field. Note that the specified temperature must be at least 5 °C below
ambient for proper temperature control.
Select Off to switch off the cooler.
To Next Page
Loading...
Need help?
General
