Key Reference 5
N9342C/43C/44C User’s Guide 99
Sweep Setup
Sweep Time Rule
Key access: [Sweep] > {Sweep Setup}
The analyzer provides two sweep time rules to
meet the different sweep time requirements:
• Speed
Activates the default fast sweep time rule.
•Accuracy
Activates the normal sweep time rule to ensure the
measurement accuracy.
Speed sweep time rule provides a fast
measurement function that decreases the sweep
time. Using Fast Sweep will decrease the
measurement accuracy.
Sweep Type
Key access: [Sweep] > {Sweep Setup}
Toggles the Sweep type between Sweep and FFT
mode. The default setting is sweep mode.
To Next Page
Loading...
