Getting Started 2
N9342C/43C/44C User’s Guide 15
Environmental Requirements
The N934xC is designed for use under the
following conditions:
• Operating temperature:
0
o
C to 40
o
C (using AC- DC adapter)
–10
o
C to +50
o
C (using battery)
• Storage temperature: –40
o
C to +70
o
C
• Battery temperature: 0
o
C to 45
o
C
• Humidity: < 95%
Electrical Requirements
The analyzer allows the use of either a lithium
battery pack (internal), AC- DC adapter shipped
with the analyzer, or optional automotive +12 VDC
adapter for its power supply.
Electrostatic Discharge (ESD) Precautions
This analyzer was constructed in an ESD protected
environment. This is because most of the
semiconductor devices used in this analyzer are
susceptible to damage by static discharge.
Depending on the magnitude of the charge, device
substrates can be punctured or destroyed by
contact or proximity of a static charge. The result
can cause degradation of device performance, early
failure, or immediate destruction.
These charges are generated in numerous ways,
such as simple contact, separation of materials,
and normal motions of persons working with static
sensitive devices.
When handling or servicing equipment containing
static sensitive devices, adequate precautions must
be taken to prevent device damage or destruction.
Only those who are thoroughly familiar with
industry accepted techniques for handling static
sensitive devices should attempt to service circuitry
with these devices.
To Next Page
Loading...
