Key Reference 5
N9342C/43C/44C User’s Guide 125
MODE
Pressing [Mode] activates the softkey menus to
select the measurement mode of your analyzer. The
measurement modes are:
• Spectrum Analyzer
• Tracking Generator
• Power Meter
• Task Planner
Spectrum Analyzer
Key access: [MODE] > {Spectrum Analyzer}
Select the spectrum analyzer mode, and press
[ENTER] to make the spectrum analysis and
measurement.
Track ing Ge nerator
Key access: [MODE] > {Tracking Generator}
Select this mode, and press [ENTER] to make
specified measurement with tracking generator.
When selected, the Meas softkey menu for the
tracking generator mode will appear.
Amplitude
Key access: [MODE] > {Tracking Generator} > {Amplitude}
Activates (On) or deactivates (Off) the output power
of the tracking generator. The power level can then
be adjusted using the numeric keypad, arrow keys,
or knob. Pressing any digit, 0 through 9, on the
numeric keypad brings up the selected terminator
menu.
To Next Page
Loading...
