Key Reference 5
N9342C/43C/44C User’s Guide 91
Display
Graticule
Key access: [Disp]
Press this softkey to turn on the graticule display
for the trace.
Y Scale
Key access: [Disp]
Press this softkey to turn on the amplitude scale
unit display on the left of the graticule. The unit
determined by the {Y Axis Unit} softkey.
Display Line
Key access: [Disp]
Activates an adjustable horizontal line that is used
as a visual reference line.
The display line, used for trace arithmetic, has
amplitude values that correspond to its vertical
position when compared to the reference level. The
value of the display line appears in both the active
function block and on the softkey. The arrow keys,
knob, or numeric keypad may be used to adjust the
display line. Pressing any digit, 0 through 9, on the
numeric keypad brings up the selected terminator
menu. To deactivate the limit line, press Display Line
(Off).
To Next Page
Loading...
