Key Reference 5
N9342C/43C/44C User’s Guide 103
Channel Std.
Key access: [FREQ] > {Channel Std.}
The Channel Standard softkey is a shortcut to load
a factory- preset standard file (*.STD) which is
located in system memory as default. The standard
file list includes most communication protocol
standards which is used in several countries.
Please refer to “Loading a file" on page 67 for how
to recall a file.
Freq Offset
Key access: [FREQ] > {Freq Offset}
Allows you to input a frequency offset value that is
added to the frequency readout of the marker, to
account for frequency conversions external to the
analyzer. Offset entries are added to all frequency
readouts including marker, start frequency, and
stop frequency. Offsets are not added to the span
or frequency count readouts. Entering an offset
does not affect the trace display.
To Next Page
Loading...
