Notices
© Agilent Technologies, Inc. 2010-2012
No part of this manual may be reproduced in
any form or by any means (including electronic
storage and retrieval or translation into a
foreign language) without prior agreement and
written consent from Agilent Technologies,
Inc. as governed by United States and
international copyright laws.
Part Number
N9342-90002
Edition
Third edition, March 2012
P
rinted in China
Agilent Technologies, Inc.
No. 116 Tian Fu 4th Street
Hi-Tech Industrial Zone (South)
Chengdu 610041, China
Warranty
The material contained in this document is
provided “as is,” and is subject to being
changed, without notice, in future editions.
Further, to the maximum extent permitted by
applicable law, Agilent disclaims all
warranties, either express or implied, with
regard to this manual and any information
contained herein, including but not limited to
the implied warranties of merchantability
and fitness for a particular purpose. Agilent
shall not be liable for errors or for incidental
or consequential damages in connection with
the furnishing, use, or performance of this
document or of any information contained
herein. Should Agilent and the user have a
separate written agreement with warranty
terms covering the material in this document
that conflict with these terms, the warranty
terms in the separate agreement shall
control.
Technology Licenses
The hardware and/or software described in
this document are furnished under a license
and may be used or copied only in accordance
with the terms of such license.
Restricted Rights Legend
If software is for use in the performance of a
U.S. Government prime contract or
subcontract, Software is delivered and
licensed as “Commercial computer software”
as defined in DFAR 252.227-7014 (June 1995),
or as a “commercial item” as defined in FAR
2.101(a) or as “Restricted computer software”
as defined in FAR 52.227-19 (June 1987) or any
equivalent agency regulation or contract
clause. Use, duplication or disclosure of
Software is subject to Agilent Technologies’
standard commercial license terms, and
non-DOD Departments and Agencies of the
U.S. Government will receive no greater than
Restricted Rights as defined in FAR
52.227-19(c)(1-2) (June 1987). U.S.
Government users will receive no greater than
Limited Rights as defined in FAR 52.227-14
(June 1987) or DFAR 252.227-7015 (b)(2)
(November 1995), as applicable in any
technical data.
Software Revision
This guide is valid for A.03.25 revisions of the
N9342C/43C/44C firmware or later.
A CAUTION notice denotes a hazard. It
calls attention to an operating procedure,
practice, or the like that, if not correctly
performed or adhered to, could result in
damage to the product or loss of impor-
tant data. Do not proceed beyond a CAU-
TION notice until the indicated conditions
are fully understood and met.
A WARNING notice denotes a hazard. It
calls attention to an operating proce-
dure, practice, or the like that, if not cor-
rectly performed or adhered to, could
result in personal injury or death. Do not
proceed beyond a WARNING notice until
the indicated conditions are fully under-
stood and met.
CAUTION
WARNING
Battery Marking
Agilent Technologies, through Rechargeable
Battery Recycling Corporation (RBRC), offers free
and convenient battery recycling options in the
U.S. and Canada. Contact RBRC at
877-2-RECYCLE (877.273.2925) or online at:
http://www.call2recycle.org/ for the nearest
recycling location.
To Next Page
Loading...
