3 Functions and Measurements
80 N9342C/43C/44C User’s Guide
• Task Planner (*.TPF)
A task planner file contains the user- defined
measurement tasks in sequence which make the
test task easier in field test.
• Setup (*.SET)
A setup file records the system setting
information, such as language, date/time, and
power saving mode. This file type is not used for
test parameter setup information.
• Standard (*.STD)
A standard file contains the frequency range and
corresponding parameters for a specific
communication standard. It allows you to recall
those default settings for the singal searching
and testing in that range.
• Amplitude Correction (*.COR)
The amplitude correction file is used for trace
amplitude offset compensation. Please refer to
“Amp Correction" on page 88 to edit and save
the correction file on HSA PC software.
• KML (*.KML)
A KML file is available for Google Earth on PC.
It is specified for channel scanner measurement
and the GPS location is only available when the
option GPS is activated.
Figure 3-31 Review the KML file in Google Earth
To Next Page
Loading...
