EasyManuals Logo

Agilent Technologies PSA Series User Guide

Agilent Technologies PSA Series
74 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
Chapter 1 15
Getting Started
Installing Option 215
Getting Started
host ID.
For the latest information on Agilent Spectrum Analyzer options and
upgrade kits, visit the following Internet URL:
http://www.agilent.com/find/sa_upgrades
Do You Have Enough Memory to Load All Your Personality
Options?
If you want to operate the instrument with four or fewer personality
options installed, you can skip ahead to the next section, “Loading an
Optional Measurement Personality” on page 18. If, after installing your
options, you get error messages relating to memory issues, you can
return to this section to learn more about how to optimize your
configuration.
If you want to install your 4th or subsequent option, you should check to
see how much memory you have available.
If you have 64 MBytes of memory installed in your instrument, you
should have ample memory to install five optional personalities, with
plenty of memory to spare for data and states.
If you have less than 64 MBytes of installed memory, depending how
much data you save, you are unlikely to have any memory issues until
you want to install your 4th option. If this is the case, you can either
swap the applications in/out of memory as needed, or you can upgrade
your hardware to 64 MBytes of memory.
To see the size of your installed memory for PSA Series Spectrum
Analyzers:
1. Ensure that the spectrum analyzer is in spectrum analyzer mode
because this can affect the screen size.
2. Press the
System key, MORE (1 of 3), and Show Hdwr keys.
3. Read Flash Memory size on the last line of the table.
If you have 48 MBytes of memory, and you want to install more than 3
optional personalities, you may need to manage your memory resources.
The following section, “How to Predict Your Memory Requirements” on
page 16, will help you decide how to configure your installed options to
provide optimal operation.
PSA Flash
Memory Size
Available Memory
With No Options
Available Memory With
Option B7J and/or Option 122
64 Mbytes 32.5 MBytes 30.0 MBytes
48 Mbytes 16.9 MBytes 14.3 MBytes

Table of Contents

Other manuals for Agilent Technologies PSA Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Agilent Technologies PSA Series and is the answer not in the manual?

Agilent Technologies PSA Series Specifications

General IconGeneral
BrandAgilent Technologies
ModelPSA Series
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals