Agilent Technologies PSA Series User Guide

Chapter 4
Source Key and Programming Commands
Normalize
60
Source Key and Programming
Commands
4.5.3 Normalized Reference Level
Allows you to set the normalized reference level.
4.5.4 Normalized Reference Position
Allows you to select the position of the normalized reference level; the top and bottom graticule line
correspond to 10 and 0 respectively.
Mode: Spectrum Analysis
Key Path:
Source, Normalize
Remote Command: :DISPlay:WINDow:TRACe:Y[:SCALe]:NRLevel <rel_ampl>
:DISPlay:WINDow:TRACe:Y[:SCALe]:NRLevel?
Factory Preset: 0.00 dB
State Saved: Saved in instrument state.
SCPI Resolution Max: 0.01 dB
Dependencies and
Couplings:
Parameter is disabled if active mode is not Spectrum Analyzer
or a connection has not been established at the specified IP
address.
Example: DISP:WIN:TRAC:Y:NRL
−1.8 dB
Mode: Spectrum Analysis
Key Path:
Source, Normalize
Remote Command: :DISPlay:WINDow:TRACe:Y[:SCALe]:NRPosition <integer>
:DISPlay:WINDow:TRACe:Y[:SCALe]:NRPosition?
Factory Preset: 10
State Saved: Saved in instrument state.
Dependencies and
Couplings:
Parameter is disabled if active mode is not Spectrum Analyzer
or a connection has not been established at the specified IP
address.
Example: DISP:WIN:TRAC:Y:NRP 9 sets it one graticule down from the
top.

Agilent Technologies PSA Series Specifications

General

Brand	Agilent Technologies
Model	PSA Series
Category	Measuring Instruments
Language	English