Agilent Technologies PSA Series - Amplitude

Chapter 4
Source Key and Programming Commands
Amplitude
51
Source Key and Programming
Commands
4.2 Amplitude
The amplitude parameter sets the power level and state of the external source, setting the state to ON
initializes the external source based on the current settings of the Spectrum Analyzer.
Mode: Spectrum Analysis
Key Path:
Source
Remote Command: :SOURce:EXTernal:POWer[:LEVel][:IMMediate][:AMPLitude]
<ampl>
:SOURce:EXTernal:POWer[:LEVel][:IMMediate][:AMPLitude]?
:OUTPut:EXTernal[:STATe] OFF|ON|1|0
:OUTPut:EXTernal[:STATe]?
Factory Preset:
−10.00 dBm, OFF
State Saved: Saved in instrument state.