28
TriScroll 600 Dry Scroll Vacuum Pump
D R A F T 4 / 2 9 / 0 4
25. Carefully scrape with a chisel to loosen the
tip seal dust from the orbiting plate, inboard
and outboard housing. If seal debris is
attached to the sides of the scroll walls, use
a razor blade or Exacto knife to scrape this
debris off.
26. Use dry compressed air to remove the tip
seal debris.
27. Clean all the parts.
28. Ensure that all parts are dry.
TriScroll 600 Disassembly (continued)
NOTE The use of an industrial
detergent and water is rec-
ommended.
To Next Page
Loading...
