Agilent Technologies TriScroll 600 Series - Assemble the Crankshaft

30
TriScroll 600 Dry Scroll Vacuum Pump
D R A F T 4 / 2 9 / 0 4
Assemble the Crankshaft
Tools required:
❑ Allen wrench
❑ Bearing pre-load tool
❑ Arbor press
❑ Krytox GPL 224 grease, included in maintenance kit
Locate the following parts shown in the photo
to the left:
➀ Crankshaft
➁ Bearing spacer
➂ 7305WN SU bearing, included in
maintenance kit
➃ 7205W SU bearings (2), included in
maintenance kit
➄ Wave washer-crank
➅ O-ring, 2-115, included in maintenance kit
➆ Seal spacer
Locate the following parts in the photo to
the left:
➀ Bearing pre-load tool
➁ Washer
➂ M8x12 screw
➃ 5x5x12 key
1. Install the wave washer onto the crankshaft.
1
2
4
5
6
7
3
4
1
2
3
4