Agilent Technologies TriScroll 600 Series - Install the Sync Crank and Tip Seals into the Outboard Housing

79
TriScroll 600 Dry Scroll Vacuum Pump
D R A F T 4 / 7 / 1 1
Install the Sync Crank and Tip Seals
into the Outboard Housing
Tools required:
❑ Allen wrench
❑ Krytox GPL 224 grease
Locate the following parts shown in the photo at
the left:
➀ Wave washer (3)
➁ Snap rings (3)
➂ Sync crank assembly (3), included in
maintenance kit
Locate the following items shown in the photo
to the left:
➀ Tip seal, included in maintenance kit
➁ M6x55 screws (6)
Outboard housing (not shown in photo)
Final Assembly (continued)
1
2
3
1
2