Spa
23
1. Lock joystick functions (if approved for road use).
2. Turn on cutter belt forward and backward independently.
3. Diagnostics, errors and errors reset.
3.1.3 WARNING LIGHTS
Motor oil pressure low.
Air filter clogged.
Motor oil level low.
Fuel level low (reserve)
Engine over-revving
Battery voltage fault.
Generator not charging.
Hydraulic oil temperature too high.
Engine coolant overheating.
CAN network communication error
Person in the seat.
Solenoid error.
Hydraulic oil level low.
Sensor error.
Hydraulic oil filter clogged.
Weighing system transmitter fault.
Speed restriction – traction system fault -
Machine stop - traction system fault -
To Next Page
Loading...