Spa
3
1. INFORMATION REGARDING THE MANUAL
This manual is to be considered an integral part of the machine and it must accompany the
machine if resold and until it is demolished.
If the manual is lost or damaged, ask the manufacturer (SITREX S.P.A Zona Industriale Viale
Grecia, 22 - 06018 Trestina (PG) Italy) or dealer for a copy. This manual consists of 64
pages.
There are a number of pictographs on the mixer feeder. It is the responsibility of the operator
to make sure they remain perfectly visible and to replace them when they are no longer
legible.
.
This symbol indicates that maximum attention must be given to the topic
discussed.
1.1 MACHINE IDENTIFICATION
The machine nameplate is located on the front part of the column holding the cutter arm
(FIGURE N°1).
FIG.1
To Next Page
Loading...