AGM sitrex MAXI 270 - Hydraulic Cylinders; Conveyor Belts; Electrical System

Spa
68
5.5 HYDRAULIC CYLINDERS
PROBLEM PROBABLE CAUSE SOLUTION
EXTERNAL OIL LEAKAGE Gaskets damaged. Replace gaskets (*).
NOT ENOUGH POWER Insufficient oil pressure.
Internal oil leakage.
See section 4.3.
Replace gaskets (*).
5.6 CONVEYOR BELTS
PROBLEM PROBABLE CAUSE SOLUTION
LATERALLY OFF-CENTER Center the belt. See section 4.3.9
TOO NOISY Reset correct belt tension. See section 4.3.10
5.7 ELECTRICAL SYSTEM
PROBLEM PROBABLE CAUSE SOLUTION
LAMP DOES
NOT WORK
Lamp broken.
Fuse blown.
Replace.
Replace – If the problem persists,
look for the fault (*).
CIRCUIT DOES
NOT WORK
Fuse blown.
Electrical failure.
Replace – If the problem persists,
look for the fault (*).
Repair (*).