Spa
29
3.5 REAR VIEW AND MIXING TANK CAMERA
The MAXI mixer feeder has a video camera installed at the rear of the machine for backing
up and an optional video camera on the top edge of the mixing tank.
When reversing with the reverse gear lever the rear view camera automatically appears on the
control panel and shows any obstacles behind the machine, while the (optional) camera on
the mixing tank can be selected from the control panel with button 6, where then by means
of the “ENTER” button it is possible using buttons 6 and 7 (FIG.1 -A-) to select the
camera you want to turn on when pressing button 6 (either the mixing tank (auger) camera
or the rear view camera).
3.6 DIESEL ENGINE
Never leave the diesel motor running in closed and unventilated areas!
Wait until the engine has cooled before doing any type of maintenance work!
The MAXI mixer feeder diesel engine is located in the rear engine compartment.
For optimal maintenance read the engine manual enclosed and pay attention to the rules to
be followed while the machine is in the breaking-in period!
For the best cooling of the motor the combined water/air radiator must constantly be kept
clean and the level of the liquid must be checked in the expansion tank located above the
radiator.
BE CAREFUL OF ANY RELEASING OF STEAM UNDER PRESSURE!
Before starting the engine, make sure the daily checks on the machine have been carried out.
To Next Page
Loading...