Spa
63
4.9 CLOGGING AND JAMMING
Should the auger or unloading belt become clogged or jammed due to the particular
characteristics of the materials, or should there be any problems of faults in the power train
components, for safety reasons the machine must be removed from its work position, the
engine switched off and the ignition key removed from the dashboard before doing any
repair work.
IMPORTANT: do not attempt to operate the machine under very difficult conditions as
this could cause serious damage to the machine itself.
To unblock the auger, wear personal protection gloves, shoes and full overalls in
sturdy, cut-resistant fabric, and use sharp tools such as knives, a hatchet etc. to
cut the material that has become twisted, clogged or jammed.
4.10 EXTRAORDINARY MAINTENANCE AND SPARE PARTS
Extraordinary maintenance refers to the replacement of major parts, such as the auger,
reduction gear, gearbox, etc. or repairs such as structural welding in general.
To replace the parts of the mixer feeder, the customer must use only original spare parts
ordered from their own authorized dealer.
When making the order, always specify the information given on the machine nameplate, in
particular:
MODEL
SERIAL NUMBER
YEAR OF MANUFACTURE
After having read the spare parts booklet, indicate the:
PLATE NUMBER
ITEM NUMBER OR CODE
QUANTITY
To Next Page