EasyManua.ls Logo

AGM sitrex MAXI 270 - Warranty; Troubleshooting; If a Warning Light Switches on

AGM sitrex MAXI 270
75 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Spa
64
4.11 WARRANTY
The use of parts not approved by the manufacturer will invalidate the warranty, and may
also put at risk the safety of the user and shorten the machine life. Therefore the
manufacturer will not accept any liability for damage to people or objects resulting from
the use of unauthorized spare parts.
5. TROUBLESHOOTING
This section describes the most likely problems that may be solved without the need for
specialized personnel.
If you have any doubts or uncertainties, contact SITREX customer service.
5.1 IF A WARNING LIGHT SWITCHES ON
A warning light turning on may indicate:
FAULTY OPERATION (RED LIGHT)
A CONTROL OR, DEVICE HAS BEEN SWITCHED ON OR THERE IS A
WARNING
The following table describes various hazard situations. If a warning light switches on, turn off
the engine, look to find the fault and eliminate it if possible.
If necessary, contact the customer service.
WARNING LIGHT SUGGESTIONS
SEE
PAGE
A
IR FILTER TURN OFF ENGINE, check filter cartridges.
ENGINE OIL TURN OFF ENGINE,
check oil level.
WATER
TEMPERATURE
TURN OFF ENGINE,
allow to cool down, check water
level
BATTERY CHARGE TURN OFF ENGINE,
check alternator and battery.
HYDRAULIC OIL
LEVEL
TURN OFF ENGINE,
check oil level in the reservoir,
look to find any leakage and top up oil.

Table of Contents