Menu page 1 Essential information and alarms
If a field in the menu shines red, there is an alarm or a malfunction.
The following machine data and alarms are shown on the display:
(1) Travel speed
(2) Residual charge of the battery
(3) Remaining run time
(4) Hours of operation
(5) Power reduction
(6) Power reduction in Watt
(7) The PTO shaft function monitoring signals a fault.
(8) The charge condition of the machine’s rechargeable battery is low.
(9) A temperature exceeds the warning limit.
Switch off the PTO shaft, allow the machine to stand still while it is still switched on so that the electronic
components continue to be cooled. Check the temperatures on menu page 3 of the remote control.
(10) An error message is pending.
Check the error codes on page 4 of the remote control, or -agria-Service-
To Next Page
Loading...