Aiphone IS SERIES - Settings under [OPTIONAL FUNCTION MENU]; Registering Sound Sequences; Sound Sequences]; Chime Setting - Registering Sound Sequences]

32
Settings under [OPTIONAL FUNCTION MENU]
Registering sound sequences
[Chime setting – Registering sound sequences]
Register sound sequences for chime.
Up to 20 sequences can be registered.
*
Click
1
Registering sound sequences in the table of
contents.
[Sound sequence number]:
2
Select the sound sequence number to register a sound
sequence from the pull-down menu.
[Sound sequence name]:
3
Enter the name of sound sequence.
Click
4
Add
to add sound fi les to the sound sequence.
Another window appears.
[Step]:
5
Select an unused step number from the pull-down menu.
If the selected step number is already used, it can be set
*
with a new sound source and the old and subsequent
ones are renumbered with the following numbers.
If an unused number exists before the number you
*
selected, the unused number is re-selected automatically.
Up to 10 steps can be used.
*
[Sound source]:
6
Select a sound fi le from the registered ones and set the
repeating time (from 1 to 10) of the sound.
When you have fi nished the setting on this window,
7
click
Close
.
In the previous window, the registered sound fi les are
displayed in the list.
Repeat step
8
2 to 7 to register more sound sequences.
Other buttons
Edit
•
If you wish to modify, check the fi le in the list, and then
click
Edit
.
Delete
•
When deleting an added sound fi le, check the fi le in the
list, and then click
Delete
.
Click
9
Temporarily stored
to save the current setting
results temporarily.
If you wish to cancel the setting results you have made,
*
click a title in the table of contents or “Refresh” in the
web browser menu.
NOTE:
It is required to register sound source(s) on the IS-CCU connected to
the IS-IPC (as the IP host unit) directly before making this setting.
(
→
P. 41)